; N1MM Logger+ UDC Contest file, rev. A. ; Try to keep the file in this order, it will make things easier to find during discussions on the user group. ; To comment out a value, precede it with a semicolon (;) ; Any line can be deleted or commented out and defaults will be used by the program. [Author] AuthorName=Eugene Callsign=RK1AA Email=rk1aa@alrs.info Revision =1.0.0 LastUpdate =04/12/2020 [Contest] Name =VHF-OPENLO ;Free to choose (10 characters max), capital letters only (if not it will be changed to all capital), no spaces allowed Example: ARRLDXCW ;This name will show up in the contest selection window and new folder with this name will be created if recording is enabled. DisplayName =SPB LO VHF CHAMPIONSHIP ;Free to choose, spaces allowed Example: ARRL DX CW CabrilloName =VHF-SPRINT ;Free to choose, no spaces allowed Example: ARRL-DX-CW ;This name will be used in the Cabrillo file ;NB RTTY contests need RTTY in the name! ;NB VHF contests need VHF in the beginning of the name! Mode =FM ;Valid are: CW SSB BOTH RTTY DupeType = 2 ;1 = All bands 2 = Each band (common) 3 = Each band & Mode 4= no check ;DupeType: (this is valid for qso's not for multipliers!) ;Dupe types define what combination of band, mode and callsign constitute a duplicate entry. ;1 = All bands Stations may be worked only once on all bands ;2 = Each band (common) Stations may be worked once on every band (mode independant) ;3 = Each band & Mode Stations may be worked once on every band and every mode (mode dependant!) ;4 = no check Stations may be worked multiple times per band/mode etc (NCJ sprint) ;Also used in MultByBand window to show modes (when 2 or 3) in section window. Multiplier1Name = EMPTY ;See list below Multiplier2Name = EMPTY ;See list below (mostly N/A if only one multiplier type exists) Multiplier3Name = EMPTY ;See list below (mostly N/A if only one or two mult type exists) ;Multiplier1Name / Multiplier2Name ;Another common rule is that points are awarded for qsos between a ;station within a specific geographic region and all other stations ;outside the region. ;Name Comment ;CountryPrefix Each country is a multiplier Example: DL, PA etc (uses WL_CTY.DAT) ;WPXprefix Each Prefix is a multiplier ;Sect Each Section is a multiplier (Need an entry in the Lookup table) ;ZN Each CQ Zone is a multiplier (max. 40) ;MiscText Each misc. text is a multiplier ;Continent Each continent is a multiplier ;N/A There is NO multiplier (mostly only IsMultiplier2 an/or IsMultiplier3) Period = 1 ;1 2 How many days is the contest (not used) PointsPerContact =1 ;any integer Default value for a contact (Points per qso) ShowMyCountryStations = True ; True Yes show My Country stations in the bandmap (normal) ; False No don't show them in the bandmap ShowWarcBands = False ; True Yes show the WARC bands (only for general logging (DX) ; False No don't show them (all contests) ZoneType = CQ ; CQ CQ type zones should be shown (for most contests) ; IARU IARU type zones should be shown ;DO NOT USE NEXT LINE - this command is not implemented yet ;SetSentExch = '"" ;Mid$(aStr, 49, 6) ;Return the sent exchange parsed from the sent exchange portion of the Cabrillo log ;aStr is the exchange portion of the Cabrillo log. Set IContest_ExchFromString to ;that portion of aStr which should be set as the exchange in the contest selection dialog. MultWindowType =EMPTY ; State US states ; StateProvince US states and Canadian Provinces are both valid entries ; Province Canadian Provinces ; Section ARRL sections, Oblast ; Provincie Netherlands Provinces (for PACC Contest) ; DOK DOK letters letters: A to Z not Q for WAG contest ; UBA ON contest ; RFC GRIDs RFC contest CQZoneMultContest = False ; True Contest uses CQ zones as a second multiplier e.g. CQWW ; False It doesn't! (Mostly) NumMults = 0 ; 0 for Field Day or other contest with no multiplier ; 1 for most contests ; 2 for CQWW (i.e. Country and Zone) BonusPoints = ; only one bonus callsign is allowed for now ; use comma to separate bonus call from bonus points MultSqlString =EMPTY ; Country (, Band) or Section (, Band) or N/A, i.e. no multipliers ;There are 5 possible combinations: ;1. MultSqlString = Country ;(new country will be counted as multiplier, same country later on any other band will not) ;2. MultSqlString = Country, Band ;(new country on each band will be counted as multiplier) ;3. MultSqlString = Section ;(new section will be counted as multiplier, same section later on any other band will not) ;4. MultSqlString = Section, Band ;(new section on each band will be counted as multiplier) ;5. MultSqlString = N/A ;(no multipliers) MultSqlString2 = EMPTY ; Country (, Band) or Section (, Band) or N/A, i.e. no multipliers. See details above. MultSqlString3 = EMPTY ; Country (, Band) or Section (, Band) or N/A, i.e. no multipliers. See details above. QsoErrorString = Numeric ;Numeric - only numbers allowed (like serial number) 12 characters max ;Any - both numbers and letters allowed (12 characters max) ;Grid - Grid Square Text, 4 or 6 characters ;the exchange field will be checked according to this setting before logging QSO QsoNumbersByBand = 1 LogInfo =SentReport, 500, SentNR, 500, ReceiveReport, 500, NR, 500, GridSquare, 600, Points, 500 ;SentReport, SentNR, ReceiveReport, NR, IsMultiplier1, IsMultiplier2, CountryPrefix, GridSquare, Exchange1, MiscText, Points, opname, Comment ;adjust the field names and spacing for the log window by adding/deleting relevant name and spacing (only names in the upper line are allowed) FrameText = SntRpt SntNR RcvRpt NR ;These are the names displayed on top of each field of Entry Window, except for the callsign ;adjust the field names and spacing for the frame text by adding/deleting spaces in this line ;any names allowed EntryWindowInfo =SNTText, 450, SntNrText, 500, RCVText, 450, RcvNrText, 500, GridSquareText, 650 ;SNTText, SntNrText, RCVText, RcvNrText, GridSquareText, Exchange1Text, CommentText ;adjust the field names and spacing for the main window by adding/deleting relevant name and spacing (only names in the upper line are allowed) DefaultContestExchange =001 KP50EB ;this will show up in the contest selection window CabrilloFormat =99 ; 1 = standard (use 1 if Cabrillo is not supported) ; 2 = NAQP format ; 3 = NASPRINT format ; 4 = SS (SweepStakes) ; 5 = RFC contest ;99 = handcoded, uses CabrilloString (see below) IsWorkable =any ;Any, MyCountryOnly,ExceptMyCountry, list of countries (prefixes) separated by comma: UA2, UA1, UA0. ;In the last case make sure you are using correct prefixes ;SpecialInstructions =Special Instructions... ;Any text terminated by CR/LF ;This message will show up after Cabrillo file was generated - use it to send some note to the operator. DupeSqlString = 0 ;Select clause that will uniquely identify a dupe: 0- turns it off, 1 - use Section, 2 - use whatever is in ExchangeText ;This is needed for qso parties where you can have mobile stations in different counties StartOfContest = 1, 17 ;First number - day of week (Sunday=1, Monday=2,....., Saturday=7) ;Second number - offset in hours (1.5 = 1 hour and 30 minutes) relative to GMT time, i.e. if it starts at 00.00 GMT the offset should be 0 ;This will be used to calculate OFF times EndOfContest = 1, 19 ;Same format as for StartOfContest ;This will be used to calculate OFF times IsMultPer =0 ;NoMults = 0, OncePerBand = 1, Oncepermode = 2, OncePerBandAndMode = 3, OncePerContest = 4 MinimumOffTime = 0 ;Min. Off time in minutes UsesWAECountries = False ;Answer whether this contest uses countries with '*' in cty.dat (e.g. for cqww it should be True) SetSentTimeForContact = False ;Used to set Sent Time in contests that require it. See CBARGT for use ScoreSummaryMultNames = "Mult" ;Used to set Mult Headings in ScoreSummary Routines CabrilloString = SNT, 4, SentNR, 4, CallSign, 13, RCV, 4, RcvNr, 4, Comment, 40 ;Format: value1 name, value1 width, value2 name, value2 width, ... ;Will work with: SNT, SentNR, CallSign, RCV, RcvNr, Comment, GridSquare, Exchange1, Name WebAddress = http://www.alrs.info/vhf ;web address for the contest rules GenericPrintString = SNT, 4, SentNr, 0, CallSign, 15, RCV, 4, RcvNr, 0, Comment, 12 ;Format: value1 name, value1 width, value2 name, value2 width, ... ;Will work with: SNT, SentNr, CallSign, RCV, RcvNr, Comment, GridSquare, Exchange1, Name, Points ;This will configure Generic file that can be used instead of Cabrillo GenericPrintStringHeader = Date Time Freq Mode MyCall RST Snt Call RST Rcvd Comment ;Addjust the names and number of spaces here according to the values in GenericPrintString (above) MultiplierBands =4 ;1 = All HF Contest Bands ;2 = All HF Bands ;3 = All HF Contest Bands plus 6 meters and 2 meters ;4 = All VHF Bands DigitalModeSqlString = False ;Used to merge RTTY and PSK into one digital contest mode MultipleSessions =1700/15 ;Leave it empty or coment this line out if the contest time is not broken into sessions ;0000/30 - starting at 00:00 UTC, sessions = 30 minutes ;0000/60 - starting at 00:00 UTC, sessions = 60 minutes ;0000/200 - starting at 00:00 UTC, sessions = 2.00 hours ;It is OK to use 0000 for contest start time if it starts in the beginning of any other hour and sessions are < or = 60 minutes. ;Dupes will be allowed when new session starts. [File] LastUpdate=15.10.2022